page 1 the big deal ? ultra-wideband, 1500 to 18000 mhz ? low insertion loss, 0.8 db ? high power handling, up to 30w as a splitter ? low unbalance, 0.1 db, 2? ? rugged unibody case, 1.90 x 0.96 x 0.46 product overview mini-circuits ZX10-2-183+ is a coaxial, ultra-wideband 2-way 0? splitter combiner providing rf input power handling up to 30w as a splitter (from 1500 to 8000 mhz) and 0.8 db insertion loss for an extreme - ly wide range of applications from 1500 to 18000 mhz. its outstanding combination of high power han - dling and low loss make this model an excellent choice for distributing signals in systems where effcient transmission of signal power is needed. the splitter/combiner comes housed in a rugged, compact case (1.90 x 0.96 x 0.46) with sma connectors. key features feature advantages ultra-wideband, 1500 to 18000 mhz ZX10-2-183+ supports bandwidth requirements for a wide variety of applications includ - ing broadband applications such as instrumentation and defense. high power handling: ? 30w to 8000 mhz ? 10w to 18000 mhz supports a wide variety of system power requirements. low insertion loss, 0.8 db provides excellent transmission of signal power, making this model an excellent candi - date for signal distribution applications where low loss is a requirement. low unbalance: ? phase unbalance, 2? ? amplitude unbalance, 0.1 db produces nearly equal output signals, ideal for parallel path / multichannel systems. dc passing up to 600ma (300ma each port) supports applications where dc power is needed through the rf line. rugged, unibody construction mini-circuits unibody construction integrates the rf connector into the case body, providing high reliability and excellent survivability in critical applications. power splitter/combiner 2 way-0 50 ? 30w 1500 to 18000 mhz high power, dc pass ZX10-2-183+ case style: kb1450 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
parameter frequency (mhz) min. typ. max. unit frequency 1500 18000 mhz insertion loss (above theoretical 3.0 db) 1500 - 8000 0.4 0.8 db 8000 - 13000 0.8 1.2 13000 - 17000 1.0 1.5 17000 - 18000 1.7 2.5 isolation 1500 - 8000 18 22 db 8000 - 13000 16 20 13000 - 17000 16 20 17000 - 18000 14 phase unbalance 1500 - 8000 1.0 4 degree 8000 - 13000 2.0 5 13000 - 17000 4.0 9 17000 - 18000 4.0 9 amplitude unbalance 1500 - 8000 0.1 0.3 db 8000 - 13000 0.15 0.4 13000 - 17000 0.2 0.6 17000 - 18000 0.4 0.9 vswr (port s) 1500 - 8000 1.22 1.5 :1 8000 - 13000 1.43 1.7 13000 - 17000 1.60 17000 - 18000 2.00 vswr (port 1-2) 1500 - 8000 1.25 1.6 :1 8000 - 13000 1.50 1.7 13000 - 17000 1.50 17000 - 18000 1.70 power handling 3 as splitter 1 1500 - 8000 30 w 8000 - 13000 16 13000 - 17000 12.5 17000 - 18000 10 as combiner 2 1500-18000 1.0 1. all outputs must terminate 50 ohm (vswr 1.5:1 or better) 2. as a combiner of non-coherent signals, max. power per port is 1.0 watt power rating divided by number of ports. 3. alternative heat sinking and heat removal must be provided by the user to limit maxmum base-plate temperature to 60c, in order to ensure proper performance. for reference, this requires thermal resistance of user's external heat sink to be 10c/w. page 2 ZX10-2-183+ 2 way-0 50 ? 30w 1500 to 18000 mhz power splitter/combiner high power, dc pass outline drawing outline dimensions ( ) inch mm electrical schematic rev. c m153965 ed-13665/3 ZX10-2-183+ wp/cp/am 151125 a bcd e fgh j 1.90 .96 .46 1.39 .04 .23 .50 .48 .21 48.26 24.38 11.68 35.31 1.02 5.84 12.70 12.19 5.33 k lm n pq rs wt .21 -- -- 1.205 .980 .46 .18 .106 grams 5.33 -- -- 30.61 24.89 11.68 4.57 2.69 50 features ? very wideband, 1500 to 18000 mhz ? low insertion loss, 0.8 db typ. ? good isolation, 22 db typ. ? up to 30w power input as splitter ? excellent amplitude unbalance, 0.1 db typ. ? excellent phase unbalance, 2 deg. typ. ? rugged shielded case applications ? pcs/dcs ? defense & federal communications ? instrumentation coaxial connections sum port s port 1 1 port 2 2 case style: kb1450 electrical specifcations at 25c dc through rf+dc rf+dc rf+dc connectors model sma ZX10-2-183-s+ maximum ratings operating temperature (@<30w) -55c to 60c operating temperature (@<10w) -55c to 100c storage temperature -55c to 100c dc current 600 ma (300ma for each port) permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 3 typical performance data frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 1500 3.22 3.24 0.02 23.11 0.07 1.32 1.16 1.16 2000 3.17 3.18 0.01 26.34 0.09 1.10 1.14 1.13 4000 3.26 3.30 0.04 38.19 0.33 1.07 1.09 1.10 5000 3.33 3.36 0.03 20.51 0.31 1.20 1.12 1.11 6000 3.32 3.37 0.05 26.65 0.28 1.05 1.15 1.15 7000 3.43 3.51 0.08 22.66 0.59 1.29 1.28 1.31 8000 3.41 3.42 0.01 23.36 0.76 1.13 1.30 1.31 9000 3.62 3.67 0.05 36.23 0.34 1.43 1.47 1.46 10000 3.54 3.63 0.09 27.17 0.66 1.26 1.26 1.27 11000 3.61 3.68 0.06 20.42 0.88 1.20 1.12 1.13 12000 3.70 3.77 0.07 18.79 1.37 1.40 1.29 1.30 14000 3.87 3.95 0.08 19.02 1.33 1.47 1.21 1.23 15000 3.72 3.84 0.12 31.12 1.27 1.07 1.10 1.12 16000 3.96 4.08 0.12 23.79 1.25 1.58 1.40 1.44 18000 4.39 4.58 0.19 12.93 1.24 1.86 1.44 1.47 3.1 3.4 3.7 4.0 4.3 4.6 0 3000 6000 9000 12000 15000 18000 total loss (db) frequency (mhz) zx10 -2 -183+ total loss s-1 s-2 10 15 20 25 30 35 40 0 3000 6000 9000 12000 15000 18000 isolation (db) frequency (mhz) zx10 -2 -183+ isolation 1.0 1.2 1.4 1.6 1.8 2.0 0 3000 6000 9000 12000 15000 18000 vswr frequency (mhz) zx10 -2 -183+ vswr #s-vswr #1-vswr #2-vswr 1. total loss = insertion loss + 3db splitter loss. ZX10-2-183+ connectors model sma ZX10-2-183-s+ notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
